Numeral systems 

Hindu–Arabic numeral system 
East Asian 

American 

Alphabetic 
Former 

Positional systems by base 
Nonstandard positional numeral systems 

List of numeral systems 
In mathematics and computing, the hexadecimal (also base 16 or hex) numeral system is a positional numeral system that represents numbers using a radix (base) of 16. Unlike the common way of representing numbers using 10 symbols, hexadecimal uses 16 distinct symbols, most often the symbols "0"–"9" to represent values 0 to 9, and "A"–"F" (or alternatively "a"–"f") to represent values 10 to 15.
Hexadecimal numerals are widely used by computer system designers and programmers because they provide a humanfriendly representation of binarycoded values. Each hexadecimal digit represents four bits (binary digits), also known as a nibble (or nybble), which is 1/2 of a byte. For example, a single byte can have values ranging from 00000000 to 11111111 in binary form, which can be conveniently represented as 00 to FF in hexadecimal.
In mathematics, a subscript is typically used to specify the base. For example, the decimal value 16,338 would be expressed in hexadecimal as 3FD2_{16}. In programming, a number of notations are used to denote hexadecimal numbers, usually involving a prefix or suffix. The prefix 0x
is used in C and related programming languages, which would denote this value as 0x3FD2
.
Hexadecimal is used in the transfer encoding Base16, in which each byte of the plaintext is broken into two 4bit values and represented by two hexadecimal digits.
In almost all modern use, the letters A–F or a–f represent the values 10–15, while the numerals 0–9 are used to represent their usual values.
There is no universal convention to use lowercase or uppercase, so each is prevalent or preferred in particular environments by community standards or convention; even mixed case is often used. Sevensegment displays use mixedcase AbCdEF to make digits that can be distinguished from each other.
There is some standardization of using spaces (rather than commas or another punctuation mark) to separate hex values in a long list. For instance in the following hex dump each 8bit byte is a 2digit hex number, with spaces between them, while the 32bit offset at the start is an 8digit hex number.
00000000 57 69 6b 69 70 65 64 69 61 2c 20 74 68 65 20 66
00000010 72 65 65 20 65 6e 63 79 63 6c 6f 70 65 64 69 61
00000020 20 74 68 61 74 20 61 6e 79 6f 6e 65 20 63 61 6e
00000030 20 65 64 69 74 0a
In contexts where the base is not clear, hexadecimal numbers can be ambiguous and confused with numbers expressed in other bases. There are several conventions for expressing values unambiguously. A numerical subscript (itself written in decimal) can give the base explicitly: 159_{10} is decimal 159; 159_{16} is hexadecimal 159, which is equal to 345_{10}. Some authors prefer a text subscript, such as 159_{decimal} and 159_{hex}, or 159_{d} and 159_{h}.
Donald Knuth introduced the use of a particular typeface to represent a particular radix in his book The TeXbook.^{[1]} Hexadecimal representations are written there in a typewriter typeface: 5A3
In linear text systems, such as those used in most computer programming environments, a variety of methods have arisen:
0x
for numeric constants represented in hex: 0x5A3
. Character and string constants may express character codes in hexadecimal with the prefix \x
followed by two hex digits: '\x1B'
represents the Esc control character; "\x1B[0m\x1B[25;1H"
is a string containing 11 characters with two embedded Esc characters.^{[2]} To output an integer as hexadecimal with the printf function family, the format conversion code %X
or %x
is used.%
: http://www.example.com/name%20with%20spaces
where %20
is the code for the space (blank) character, ASCII code point 20 in hex, 32 in decimal.ode;
, for instance ’
represents the character U+2019 (the right single quotation mark). If there is no x
the number is decimal (thus ’
is the same character).^{[3]}U+
followed by the hex value, e.g. U+20AC
is the Euro sign (€).#
: white, for example, is represented as #FFFFFF
.^{[4]} CSS also allows 3hexdigit abbreviations with one hexdigit per component: #FA3 abbreviates #FFAA33 (a golden orange: ).=
: Espa=F1a
is "España" (F1 is the code for ñ in the ISO/IEC 88591 character set).^{[5]})FFh
or 05A3H
. Some implementations require a leading zero when the first hexadecimal digit character is not a decimal digit, so one would write 0FFh
instead of FFh
$
as a prefix: $5A3
.H'ABCD'
(for ABCD_{16}). Similarly, Fortran 95 uses Z'ABCD'.16#5A3#
. For bit vector constants VHDL uses the notation x"5A3"
.^{[7]}8'hFF
, where 8 is the number of bits in the value and FF is the hexadecimal constant.16r
: 16r5A3
16#
: 16#5A3
. For PostScript, binary data (such as image pixels) can be expressed as unprefixed consecutive hexadecimal pairs: AA213FD51B3801043FBC
...#x
and #16r
. Setting the variables *readbase*^{[8]} and *printbase*^{[9]} to 16 can also be used to switch the reader and printer of a Common Lisp system to Hexadecimal number representation for reading and printing numbers. Thus Hexadecimal numbers can be represented without the #x or #16r prefix code, when the input or output base has been changed to 16.&H
: &H5A3
&
for hex.^{[11]}0h
prefix: 0h5A3
16r
to denote hexadecimal numbers: 16r5a3
. Binary, quaternary (base4) and octal numbers can be specified similarly.X'5A3'
, and is used in Assembler, PL/I, COBOL, JCL, scripts, commands and other places. This format was common on other (and now obsolete) IBM systems as well. Occasionally quotation marks were used instead of apostrophes.:
). This, for example, is a valid IPv6 address: 2001:0db8:85a3:0000:0000:8a2e:0370:7334
or abbreviated by removing zeros as 2001:db8:85a3::8a2e:370:7334
(IPv4 addresses are usually written in decimal).3F2504E04F8941D39A0C0305E82C3301
.The use of the letters A through F to represent the digits above 9 was not universal in the early history of computers.
There are no traditional numerals to represent the quantities from ten to fifteen – letters are used as a substitute – and most European languages lack nondecimal names for the numerals above ten. Even though English has names for several nondecimal powers (pair for the first binary power, score for the first vigesimal power, dozen, gross and great gross for the first three duodecimal powers), no English name describes the hexadecimal powers (decimal 16, 256, 4096, 65536, ... ). Some people read hexadecimal numbers digit by digit, like a phone number, or using the NATO phonetic alphabet, the Joint Army/Navy Phonetic Alphabet, or a similar adhoc system. In the wake of the adoption of hexadecimal among IBM System/360 programmers, Magnuson (1968)^{[18]} suggested a pronunciation guide that gave short names to the letters of hexadecimal – for instance, "A" was pronounced "ann", B "bet", C "chris", etc.^{[18]} Another naming system was elaborated by Babb (2015), off a TV series as a joke.^{[19]} Yet another namingsystem has was published online by Rogers (2007)^{[20]} that tries to make the verbal representation distinguishable in any case, even when the actual number does not contain numbers A–F. Examples are listed in the tables below.
Systems of counting on digits have been devised for both binary and hexadecimal. Arthur C. Clarke suggested using each finger as an on/off bit, allowing finger counting from zero to 1023_{10} on ten fingers.^{[21]} Another system for counting up to FF_{16} (255_{10}) is illustrated on the right.
Number  Pronunciation 

A  ann 
B  bet 
C  chris 
D  dot 
E  ernest 
F  frost 
1A  annteen 
A0  annty 
5B  fiftybet 
A01C  annty christeen 
1AD0  annteen dotty 
3A7D  thirtyann seventydot 
Number  Pronunciation 

A  ten 
B  eleven 
C  twelve 
D  draze 
E  eptwin 
F  fim 
10  tex 
11  oneteek 
1F  fimteek 
50  fiftek 
C0  twelftek 
100  hundrek 
1000  thousek 
3E  thirtekeptwin 
E1  eptekone 
C4A  twelvehundrekfourtekten 
1743  onethousekseven hundrekfourtekthree 
The hexadecimal system can express negative numbers the same way as in decimal: −2A to represent −42_{10} and so on.
Hexadecimal can also be used to express the exact bit patterns used in the processor, so a sequence of hexadecimal digits may represent a signed or even a floating point value. This way, the negative number −42_{10} can be written as FFFF FFD6 in a 32bit CPU register (in two'scomplement), as C228 0000 in a 32bit FPU register or C045 0000 0000 0000 in a 64bit FPU register (in the IEEE floatingpoint standard).
Just as decimal numbers can be represented in exponential notation, so too can hexadecimal numbers. By convention, the letter P (or p, for "power") represents times two raised to the power of, whereas E (or e) serves a similar purpose in decimal as part of the E notation. The number after the P is decimal and represents the binary exponent. Increasing the exponent by 1 multiplies by 2, not 16. 10.0p1 = 8.0p2 = 4.0p3 = 2.0p4 = 1.0p5. Usually, the number is normalized so that the leading hexadecimal digit is 1 (unless the value is exactly 0).
Example: 1.3DEp42 represents 1.3DE_{16} × 2^{4210}.
Hexadecimal exponential notation is required by the IEEE 7542008 binary floatingpoint standard. This notation can be used for floatingpoint literals in the C99 edition of the C programming language.^{[22]} Using the %a or %A conversion specifiers, this notation can be produced by implementations of the printf family of functions following the C99 specification^{[23]} and Single Unix Specification (IEEE Std 1003.1) POSIX standard.^{[24]}
Most computers manipulate binary data, but it is difficult for humans to work with a large number of digits for even a relatively small binary number. Although most humans are familiar with the base 10 system, it is much easier to map binary to hexadecimal than to decimal because each hexadecimal digit maps to a whole number of bits (4_{10}). This example converts 1111_{2} to base ten. Since each position in a binary numeral can contain either a 1 or a 0, its value may be easily determined by its position from the right:
Therefore:
1111_{2}  = 8_{10} + 4_{10} + 2_{10} + 1_{10} 
= 15_{10} 
With little practice, mapping 1111_{2} to F_{16} in one step becomes easy: see table in written representation. The advantage of using hexadecimal rather than decimal increases rapidly with the size of the number. When the number becomes large, conversion to decimal is very tedious. However, when mapping to hexadecimal, it is trivial to regard the binary string as 4digit groups and map each to a single hexadecimal digit.
This example shows the conversion of a binary number to decimal, mapping each digit to the decimal value, and adding the results.
(01011110101101010010)_{2}  = 262144_{10} + 65536_{10} + 32768_{10} + 16384_{10} + 8192_{10} + 2048_{10} + 512_{10} + 256_{10} + 64_{10} + 16_{10} + 2_{10} 
= 387922_{10} 
Compare this to the conversion to hexadecimal, where each group of four digits can be considered independently, and converted directly:
(01011110101101010010)_{2}  =  0101_{ }  1110_{ }  1011_{ }  0101_{ }  0010_{2} 
=  5  E  B  5  2_{16}  
=  5EB52_{16} 
The conversion from hexadecimal to binary is equally direct.
Although quaternary (base 4) is little used, it can easily be converted to and from hexadecimal or binary. Each hexadecimal digit corresponds to a pair of quaternary digits and each quaternary digit corresponds to a pair of binary digits. In the above example 5 E B 5 2_{16} = 11 32 23 11 02_{4}.
The octal (base 8) system can also be converted with relative ease, although not quite as trivially as with bases 2 and 4. Each octal digit corresponds to three binary digits, rather than four. Therefore, we can convert between octal and hexadecimal via an intermediate conversion to binary followed by regrouping the binary digits in groups of either three or four.
As with all bases there is a simple algorithm for converting a representation of a number to hexadecimal by doing integer division and remainder operations in the source base. In theory, this is possible from any base, but for most humans only decimal and for most computers only binary (which can be converted by far more efficient methods) can be easily handled with this method.
Let d be the number to represent in hexadecimal, and the series h_{i}h_{i−1}...h_{2}h_{1} be the hexadecimal digits representing the number.
"16" may be replaced with any other base that may be desired.
The following is a JavaScript implementation of the above algorithm for converting any number to a hexadecimal in String representation. Its purpose is to illustrate the above algorithm. To work with data seriously, however, it is much more advisable to work with bitwise operators.
function toHex(d) {
var r = d % 16;
if (d  r == 0) {
return toChar(r);
}
return toHex((d  r) / 16) + toChar(r);
}
function toChar(n) {
const alpha = "0123456789ABCDEF";
return alpha.charAt(n);
}
It is also possible to make the conversion by assigning each place in the source base the hexadecimal representation of its place value — before carrying out multiplication and addition to get the final representation. For example, to convert the number B3AD to decimal, one can split the hexadecimal number into its digits: B (11_{10}), 3 (3_{10}), A (10_{10}) and D (13_{10}), and then get the final result by multiplying each decimal representation by 16^{p} (p being the corresponding hex digit position, counting from right to left, beginning with 0). In this case, we have that:
B3AD = (11 × 16^{3}) + (3 × 16^{2}) + (10 × 16^{1}) + (13 × 16^{0})
which is 45997 in base 10.
Most modern computer systems with graphical user interfaces provide a builtin calculator utility capable of performing conversions between the various radices, and in most cases would include the hexadecimal as well.
In Microsoft Windows, the Calculator utility can be set to Scientific mode (called Programmer mode in some versions), which allows conversions between radix 16 (hexadecimal), 10 (decimal), 8 (octal) and 2 (binary), the bases most commonly used by programmers. In Scientific Mode, the onscreen numeric keypad includes the hexadecimal digits A through F, which are active when "Hex" is selected. In hex mode, however, the Windows Calculator supports only integers.
Elementary operations such addition, subtraction, multiplication and division can be carried out indirectly through conversion to an alternate numeral system, such as the commonlyused decimal system or the binary system where each hex digit corresponds to four binary digits.
Alternatively, one can also perform elementary operations directly within the hex system itself — by relying on its addition/multiplication tables and its corresponding standard algorithms such as long division and the traditional subtraction algorithm.^{[25]}
As with other numeral systems, the hexadecimal system can be used to represent rational numbers, although repeating expansions are common since sixteen (10_{16}) has only a single prime factor; two.
For any base, 0.1 (or "1/10") is always equivalent to one divided by the representation of that base value in its own number system. Thus, whether dividing one by two for binary or dividing one by sixteen for hexadecimal, both of these fractions are written as 0.1
. Because the radix 16 is a perfect square (4^{2}), fractions expressed in hexadecimal have an odd period much more often than decimal ones, and there are no cyclic numbers (other than trivial single digits). Recurring digits are exhibited when the denominator in lowest terms has a prime factor not found in the radix; thus, when using hexadecimal notation, all fractions with denominators that are not a power of two result in an infinite string of recurring digits (such as thirds and fifths). This makes hexadecimal (and binary) less convenient than decimal for representing rational numbers since a larger proportion lie outside its range of finite representation.
All rational numbers finitely representable in hexadecimal are also finitely representable in decimal, duodecimal and sexagesimal: that is, any hexadecimal number with a finite number of digits also has a finite number of digits when expressed in those other bases. Conversely, only a fraction of those finitely representable in the latter bases are finitely representable in hexadecimal. For example, decimal 0.1 corresponds to the infinite recurring representation 0.19 in hexadecimal. However, hexadecimal is more efficient than duodecimal and sexagesimal for representing fractions with powers of two in the denominator. For example, 0.0625_{10} (onesixteenth) is equivalent to 0.1_{16}, 0.09_{12}, and 0;3,45_{60}.
n  Decimal Prime factors of base, b = 10: 2, 5; b − 1 = 9: 3; b + 1 = 11: 11 
Hexadecimal Prime factors of base, b = 16_{10} = 10: 2; b − 1 = 15_{10} = F: 3, 5; b + 1 = 17_{10} = 11: 11  

Fraction  Prime factors  Positional representation  Positional representation  Prime factors  Fraction(1/n)  
2  1/2  2  0.5  0.8  2  1/2 
3  1/3  3  0.3333... = 0.3  0.5555... = 0.5  3  1/3 
4  1/4  2  0.25  0.4  2  1/4 
5  1/5  5  0.2  0.3  5  1/5 
6  1/6  2, 3  0.16  0.2A  2, 3  1/6 
7  1/7  7  0.142857  0.249  7  1/7 
8  1/8  2  0.125  0.2  2  1/8 
9  1/9  3  0.1  0.1C7  3  1/9 
10  1/10  2, 5  0.1  0.19  2, 5  1/A 
11  1/11  11  0.09  0.1745D  B  1/B 
12  1/12  2, 3  0.083  0.15  2, 3  1/C 
13  1/13  13  0.076923  0.13B  D  1/D 
14  1/14  2, 7  0.0714285  0.1249  2, 7  1/E 
15  1/15  3, 5  0.06  0.1  3, 5  1/F 
16  1/16  2  0.0625  0.1  2  1/10 
17  1/17  17  0.0588235294117647  0.0F  11  1/11 
18  1/18  2, 3  0.05  0.0E38  2, 3  1/12 
19  1/19  19  0.052631578947368421  0.0D79435E5  13  1/13 
20  1/20  2, 5  0.05  0.0C  2, 5  1/14 
21  1/21  3, 7  0.047619  0.0C3  3, 7  1/15 
22  1/22  2, 11  0.045  0.0BA2E8  2, B  1/16 
23  1/23  23  0.0434782608695652173913  0.0B21642C859  17  1/17 
24  1/24  2, 3  0.0416  0.0A  2, 3  1/18 
25  1/25  5  0.04  0.0A3D7  5  1/19 
26  1/26  2, 13  0.0384615  0.09D8  2, D  1/1A 
27  1/27  3  0.037  0.097B425ED  3  1/1B 
28  1/28  2, 7  0.03571428  0.0924  2, 7  1/1C 
29  1/29  29  0.0344827586206896551724137931  0.08D3DCB  1D  1/1D 
30  1/30  2, 3, 5  0.03  0.08  2, 3, 5  1/1E 
31  1/31  31  0.032258064516129  0.08421  1F  1/1F 
32  1/32  2  0.03125  0.08  2  1/20 
33  1/33  3, 11  0.03  0.07C1F  3, B  1/21 
34  1/34  2, 17  0.02941176470588235  0.078  2, 11  1/22 
35  1/35  5, 7  0.0285714  0.075  5, 7  1/23 
36  1/36  2, 3  0.027  0.071C  2, 3  1/24 
The table below gives the expansions of some common irrational numbers in decimal and hexadecimal.
Number  Positional representation  

Decimal  Hexadecimal  
√2 (the length of the diagonal of a unit square)  1.414213562373095048...  1.6A09E667F3BCD... 
√3 (the length of the diagonal of a unit cube)  1.732050807568877293...  1.BB67AE8584CAA... 
√5 (the length of the diagonal of a 1×2 rectangle)  2.236067977499789696...  2.3C6EF372FE95... 
φ (phi, the golden ratio = (1+√5)/2)  1.618033988749894848...  1.9E3779B97F4A... 
π (pi, the ratio of circumference to diameter of a circle)  3.141592653589793238462643 383279502884197169399375105... 
3.243F6A8885A308D313198A2E0 3707344A4093822299F31D008... 
e (the base of the natural logarithm)  2.718281828459045235...  2.B7E151628AED2A6B... 
τ (the Thue–Morse constant)  0.412454033640107597...  0.6996 9669 9669 6996... 
γ (the limiting difference between the harmonic series and the natural logarithm) 
0.577215664901532860...  0.93C467E37DB0C7A4D1B... 
Powers of two have very simple expansions in hexadecimal. The first sixteen powers of two are shown below.
2^{x}  Value  Value (Decimal) 

2^{0}  1  1 
2^{1}  2  2 
2^{2}  4  4 
2^{3}  8  8 
2^{4}  10_{hex}  16_{dec} 
2^{5}  20_{hex}  32_{dec} 
2^{6}  40_{hex}  64_{dec} 
2^{7}  80_{hex}  128_{dec} 
2^{8}  100_{hex}  256_{dec} 
2^{9}  200_{hex}  512_{dec} 
2^{A} (2^{10dec})  400_{hex}  1024_{dec} 
2^{B} (2^{11dec})  800_{hex}  2048_{dec} 
2^{C} (2^{12dec})  1000_{hex}  4096_{dec} 
2^{D} (2^{13dec})  2000_{hex}  8192_{dec} 
2^{E} (2^{14dec})  4000_{hex}  16,384_{dec} 
2^{F} (2^{15dec})  8000_{hex}  32,768_{dec} 
2^{10} (2^{16dec})  10000_{hex}  65,536_{dec} 
The traditional Chinese units of measurement were base16. For example, one jīn (斤) in the old system equals sixteen taels. The suanpan (Chinese abacus) can be used to perform hexadecimal calculations such as additions and subtractions.^{[26]}
As with the duodecimal system, there have been occasional attempts to promote hexadecimal as the preferred numeral system. These attempts often propose specific pronunciation and symbols for the individual numerals.^{[27]} Some proposals unify standard measures so that they are multiples of 16.^{[28]}^{[29]} An early such proposal was put forward by John W. Nystrom in Project of a New System of Arithmetic, Weight, Measure and Coins: Proposed to be called the Tonal System, with Sixteen to the Base, published in 1862.^{[30]} Nystrom among other things suggested hexadecimal time, which subdivides a day by 16, so that there are 16 "hours" (or "10 tims", pronounced tontim) in a day.^{[31]}
The word hexadecimal is first recorded in 1952.^{[32]} It is macaronic in the sense that it combines Greek ἕξ (hex) "six" with Latinate decimal. This isn't an uncommon occurrence in international scientific vocabulary.
The allLatin alternative sexadecimal is older, and sees at least occasional use from the late 19th century.^{[33]} It is still in use in the 1950s in Bendix documentation (compare the word sexagesimal for base 60, which also uses the Latin prefix). Schwartzman (1994) argues that use of sexadecimal may have been avoided because of its suggestive abbreviation to sex.^{[34]} Many western languages since the 1960s have adopted terms equivalent in formation to hexadecimal (e.g. French hexadécimal, Italian esadecimale, Romanian hexazecimal, Serbian хексадецимални, etc.) but others have introduced terms which substitute native words for "sixteen" (e.g. Greek δεκαεξαδικός, Icelandic sextándakerfi, Russian шестнадцатеричной etc.)
Terminology and notation did not become settled until the end of the 1960s. Donald Knuth in 1969 argued that that the etymologically correct term would be senidenary, or possibly sedenary, a Latinate term intended to convey "grouped by 16" modelled on binary, ternary and quaternary etc. According to Knuth's argument, the correct terms for decimal and octal arithmetic would be denary and octonary, respectively.^{[35]} Alfred B. Taylor used senidenary in his mid1800s work on alternative number bases, although he rejected base 16 because of its "incommodious number of digits".^{[36]}^{[37]}
The nowcurrent notation using the letters A to F establishes itself as the de facto standard beginning in 1966, in the wake of the publication of the Fortran IV manual for IBM System/360, which (unlike earlier variants of Fortran) recognizes a standard for entering hexadecimal constants.^{[38]} As noted above, alternative notations were used by NEC (1960) and The Pacific Data Systems 1020 (1964). The standard adopted by IBM seems to have become widely adopted by 1968, when Bruce Alan Martin in his letter to the editor of the CACM complains that
Martin's argument was that use of numerals 0 to 9 in nondecimal numbers "imply to us a baseten placevalue scheme": "Why not use entirely new symbols (and names) for the seven or fifteen nonzero digits needed in octal or hex. Even use of the letters A through P would be an improvement, but entirely new symbols could reflect the binary nature of the system".^{[17]}
Base16 (as a proper name without a space) can also refer to a binary to text encoding belonging to the same family as Base32, Base58, and Base64.
In this case, data is broken into 4bit sequences, and each value (between 0 and 15 inclusively) is encoded using 16 symbols from the ASCII character set. Although any 16 symbols from the ASCII character set can be used, in practice the ASCII digits '0'–'9' and the letters 'A'–'F' (or the lowercase 'a'–'f') are always chosen in order to align with standard written notation for hexadecimal numbers.
There are several advantages of Base16 encoding:
The main disadvantages of Base16 encoding are:
Support for Base16 encoding is ubiquitous in modern computing. It is the basis for the W3C standard for URL percent encoding, where a character is replaced with a percent sign "%" and its Base16encoded form. Most modern programming languages directly include support for formatting and parsing Base16encoded numbers.
"\x1B[0m\x1B[25;1H"
specifies the character sequence Esc [ 0 m Esc [ 2 5 ; 1 H Nul. These are the escape sequences used on an ANSI terminal that reset the character set and color, and then move the cursor to line 25.
&
to prefix octal values. (Microsoft BASIC primarily uses &O
to prefix octal, and it uses &H
to prefix hexadecimal, but the ampersand alone yields a default interpretation as an octal prefix.
This base is used because a group of four bits can represent any one of sixteen different numbers (zero to fifteen). By assigning a symbol to each of these combinations we arrive at a notation called sexadecimal (usually hex in conversation because nobody wants to abbreviate sex). The symbols in the sexadecimal language are the ten decimal digits and, on the G15 typewriter, the letters u, v, w, x, y and z. These are arbitrary markings; other computers may use different alphabet characters for these last six digits.
By: Wikipedia.org
Edited: 20210618 14:09:38
Source: Wikipedia.org